DVP-6000N series...Current location Product Fields DVP-6000N series...

 DVP-6000N series digital protection and monitor device

        DVP-6000N series digital protection and monitor device is the main object of monitor and protection with a variety of 0.4kV ~ 35kV low voltage primary equipment, it is a intelligent device with protection, measurement, control and communication, mainly suitable for protection and monitor power plant, substation and auxiliary power system of the industrial and mining enterprise.
        This series of product can not only collect to group panel or group cabinet , but also can be locally installed in the switch cabinet.

     1. Characteristic
        ◆  Advanced digital signal processing technology.
        ◆  High reliability hardware and software redundancy design makes the device have a extremely strong anti-jamming performance.
        ◆  LCD can be switched in English and Chinese, completely menulize operation, decimalism continuous setting.
           The standard for LCD is 128*64 lattice, but it also can choose as 240*160 lattice,the use of 240*160 lattice LCD can also be real-time display of the AC analog waveform and the main wiring diagram.(Order need to be noted)
        ◆  Transmission test function can be carried out for the exit loop linkage check.
        ◆  Completely software and hardware self-test function. Abnormal found then lock exit and send alarm signal , and the fault will be displayed.
        ◆  Online monitoring and recording function can display a variety of protection and measurement parameters, such as current, voltage, active power, reactive power, power factor, switch value state, 2 ~ 23 harmonic measurement and total harmonic distortion rate THD ,etc.
        ◆  High reliability and capacity FLASH memory is used to store a large number of device events and operating records permanently, but also can save 10 times recent fault recording data, the length of each recording data for 4 to 10 seconds.
            The recording data can be displayed on the device (use 240*160 lattice LCD can display fault waveform), can also be exported to the U disk and show the fault waveform by Excel, so that more convenient for fault analysis.
        ◆  Flexible communication port configuration, communication port can be configured as dual ethernet, dual RS485 interface or one ethernet interface with one RS485 interface , single ethernet interface is the standard configuration.
        ◆  All the protection functions (including non electrical protection) can select the way of exit by itself and have soft strap in service and out of service.
        ◆  All user names can be redefined themselves according to the drawings.
        ◆  Can be set 4 sets of fixed values in order to adapt various operating conditions.
        ◆  The device equipped with USB interface, it can upgrade the program itself, but also can export the device parameters, protection settings, SOE events, operating records, device information table, fault recording data through the U disk, the device parameters and the protection setting values can be modified according to the derived format and then lead-in device through the U disk, so that not every device has to enter the menu setting, a lot of workload have been reduced.
        ◆  The device has a variety of functional modules including input/output expansion, operating loop, DC analog input, 4 to 20mA DC analog output, temperature resistance measurement,etc, it can be configured into various functions of the protection and monitor devices to meet the needs of multiple industries.

      2.The Key Technical Indexes
         Supply Voltage:

                       DC220V±15% OR DC110V±15% (Order need to be noted)
                       AC220V±15%
         AC Rated Current: 5A（1A Order need to be noted）
         AC Rated Voltage:100V（57V），380V（220V）
         Rated Frequency:50 Hz
         Parameter Setting Range:
                        Current:0.1Ie～20Ie
                        Voltage:1～500V
         Zero Sequence Current:5mA～1.2A
        Time:0～9999S  All Can Continuous Setting
        The Accuracy of Measuring Element:
        Setting Error: Current and Voltage Setting Error Not Exceeding±2.5%;
        Time Setting Error Not Exceeding±40ms;
        The Whole Group Actuation Time Not Exceeding ±35ms
        Temperature Variation: Relative To 20℃±2℃ In The Working Environment Temperature Range, Not Exceeding ±5%
        Measurement Accuracy: Current, Voltage and Frequency≤±0.2%；The Others≤±2%
        Overload Capacity:
                         Alternating Current Loop:      
                         2Ie Continuous Operation
                         10Ie Continuous Operation 10s
                         40Ie Continuous Operation 1s
                         Alternating Voltage Loop:
                         1.4Ue Continuous Operation
                         2Ue  Continuous Operation 10s
          Power Consumption:
                        Alternating Current Loop＜ 0.5VA/Phase
                        Alternating Voltage Loop＜ 0.5VA/Phase
                        Power Loop              ＜ 10W
         Electromagnetic Compatibility:
                        GB/T14598.9-2002        Radiation Electromagnetic Interference Test Ⅲ Level.
                       GB/T14598.10-2007       Transient Interference Test Ⅲ Level.
                       GB/T14598.13-2008       1MHz and 100KHz Pulse Train Interference Test Ⅲ Level.
                       GB/T14598.14-1998       Electrostatic Discharge Interference Test Ⅲ Level.
          Insulation Property:
                       Insulation Resistance Level: The charged part and the uncharged part of the device and the place between shell and the electrical loop that without contact then measure the insulation resistance value with 500V megger , evey grade insulation resistance of each loop is not less than 100MΩ under the normal atmospheric conditions test.
                       Power Frequency Withstand Voltage Level: AC loop ground withstand voltage 2000V, DC loop ground withstand voltage 1500V, the withstand voltage between AC loop and DC loop1000V,test time 1 minute, rated insulation voltage＞60V。
                      Impulse Voltage:1.2/50μs Standard Lightning Short Impulse Voltage, Test Voltage 5kV.
          Mechanical Property:
                       GB/T11287-2000         Vibration Response Test Ⅰ level.
                       GB/T11287-2000         Vibration Endurance Test Ⅰ level.
                       GB/T14537-1993         Shock Response Test Ⅰ level.
                       GB/T14537-1993         Impact Fatigue Test Ⅰ level.
                       GB/T14537-1993         Crash Test Ⅰ level.
           Atmospheric Conditions:
                       Ambient Temperature:  -25℃～+55℃
                       Relative Humidity:   5%～95%
                       Atmospheric Pressure: 86kPa～106kpa
           Output Contact Capacity:
                      Signal Contact: long-term through current 1A, breaking current 0.3A（DC220V，V/R  1ms）
                      Trip and Closing Contact: long-term through current 5A, breaking current 0.3A（DC220V，V/R  1ms）

     3. Device Structure
         The device dimension is high200*wide175*deep130（mm）, Please see chart below.